Where to place and how to correctly configure a WiFi repeater
as central as possible
If we have to serve several rooms that do not have a good signal, the repeater must be at a midpoint between them.
We must be aware that the more oriented it is towards the middle of the area where we must increase the Wi-Fi power, the better the wireless signal will be distributed, which will mean that all those rooms will benefit equally.
If it is only one that does not get the signal, all we have to do is place the repeater as close to the room, but without forgetting the area where the router no longer emits with power.
High and no interference
It would be best to have the repeater as high as possible, since if it is too low, it can experience more interference than if it is high.
But not everything is the elevation, since we should be clear that the repeater does not have to be in an area where there are no other devices too close, since in that case interference could be unavoidable.
Avoid low signal areas
As we have already mentioned, we should never put it in the area where the router loses signal, since what these devices do is repeat what the router emits, so if there is not good coverage, the repeater will not have it either.
Placing this device in such an area is as if we did nothing, since we will have exactly the same problem as if we only used the router.
The best 4G WiFi routers you can buy right now
These 4G routers are compact and use 4G networks to give you WiFi connection to various devices, they are cheap and perfect for travelers.read the list
When we have the perfect location
Once we have managed to find the perfect location for our repeater, it is time to take into account other types of recommendations.
These tips are given so that we do not lose any of the signal that has cost us so much to find, since now that the repeater is in the best area.
If we can, it is convenient to do the following:
Configure a repeater
The normal way to configure a repeater is to follow a few steps that are common in the vast majority of this type of device.
We can get an idea with the following:
If our router has the button called WPS, the connection process varies slightly and becomes more intuitive and with fewer steps.
This is what to do:
Perhaps you expected that the task of configuring a repeater would be complicated, although you have already seen that it is not. Where there may be more difficulty is in finding the perfect place or the closest thing in the placement of the repeater.
Basically it is arming yourself with patience and carrying out many tests until the device is in the ideal position to be able to enjoy your Internet connection.